CHAPTER 2 PART NAMES AND FUNCTIONS
User’s Manual U16622EJ1V0UM
19
2.2 LEDs Controlled by IE-703204-G1-EM1
Some of the LEDs mounted in the IE-V850ES-G1 are controlled by the IE-703204-G1-EM1.
For the LEDs that are controlled by the IE-V850ES-G1, refer to the
IE-V850ES-G1 User’s Manual (U16313E)
.
Figure 2-2. LEDs Controlled by IE-703204-G1-EM1
POWER
Reset LED
Target V
DD
supply voltage <1>
TARGET
Target V
DD
supply voltage <2>
(1) Reset LED
The status of the RESET signal connected to the target system is indicated as follows.
Lit (ON):
The target system is connected and the RESET signal is active (GND level).
Unlit (OFF): Either the target system is not connected, or the RESET signal is inactive (V
DD
level).
(2) Target V
DD
supply voltage <1>
The status of the V
DD
signal connected to the target system is indicated as follows.
(This LED indicates the status of pin 11 during V850ES/SA2 emulation, and the status of the F3 pin during
V850ES/SA3 emulation.)
Lit (ON):
The target system is connected, and voltage is being applied to the V
DD
pin.
Unlit (OFF): Either the target system is not connected, or voltage is not being applied to the V
DD
pin.
(3) Target V
DD
supply voltage <2>
The status of the V
DD
signal connected to the target system is indicated as follows.
(This LED indicates the status of pin 19 during V850ES/SA2 emulation, and the status of the H2 pin during
V850ES/SA3 emulation.)
Lit (ON):
The target system is connected and voltage is being applied to the V
DD
pin.
Unlit (OFF): Either the target system is not connected, or voltage is not being applied to the V
DD
pin.
