background image

8000 - Voice Mail

8008 - IntraMail Dial Action Tables

248

Chapter 3: Programming

IntraMail System Guide

To have Unscreened Transfer call a speci

fi

c extension, the corresponding 

Number

 option should be 

that extension’s number. The caller then dials that single digit to reach the extension.
- For example, to have caller’s dial 8 to reach extension 303, for key 8 enter UTRF for the 

Action

 and 

303 for the corresponding 

Number

.

Additional Information

See the detailed Uns

creened Transfer Operation

 call routing chart on page 181 for more.

Also see 

Screened Transfer

 on page 161 and 

Unscreened Transfer

 on page 180.

REC1 Action - Quick Message With Greeting (3)

(REC1)

Use this action to allow an Automated Attendant caller to leave a Quick Message at an extension. With this 
action, the caller 

will

 hear the extension’s greeting prior to leaving the message.

Number Options

To have the caller leave a quick Message at a speci

fi

c extension, the corresponding 

Number

 option 

should be the extension number.

To have the caller leave a Quick Message at any caller-dialed extension, the corresponding 

Number

 

option should be IXXX.

To have the caller leave a Quick Message at a caller-dialed extension in a speci

fi

c range, the corre-

sponding 

Number

 option should be XXX.

- For example, to allow callers to leave a Quick Message extensions 300-399, for key 3 enter REC1 

for the 

Action

 and XXX for the corresponding 

Number

.

Additional Information

See 

Quick Message

 on page 156 for more.

REC2 Action - Quick Message Without Greeting (4)

(REC2)

Use this action to allow an Automated Attendant caller to leave a Quick Message at an extension. With this 
action, the caller 

will not

 hear the extension’s greeting prior to leaving the message. Instead, the caller hears 

the voice prompt “

Recording”

 followed by a beep.

Number Option

To have the caller leave a quick Message at a speci

fi

c extension, the corresponding 

Number

 option 

should be the extension number.

To have the caller leave a Quick Message at any caller-dialed extension, the corresponding 

Number

 

option should be IXXX.

To have the caller leave a Quick Message at a caller-dialed extension in a speci

fi

c range, the corre-

sponding 

Number

 option should be XXX.

- For example, to allow callers to leave a Quick Message extensions 300-399, for key 3 enter REC2 

for the 

Action

 and XXX for the corresponding 

Number

.

Additional Information

See 

Quick Message

 on page 156 for more.

LOGON Action - Log Onto Voice Mail (5)

(LOGON)

Use this key action to allow an Automated Attendant caller to log onto Voice Mail. Depending on program-
ming (see 

Number

 

Option

 below), the caller is logged directly into a Subscriber Mailbox or is prompted to 

enter a Subscriber Mailbox of their own choosing. 

You cannot use the LOGON option with Call Routing and 

Announcement Mailboxes.

Number Option

To log directly into a speci

fi

c Subscriber Mailbox, enter the 

mailbox number

 in the corresponding 

Number

 option.

- For example, to have key 4 log directly into Subscriber Mailbox 305, for key 4 enter LOGON for 

the 

Action

 and 305 for the corresponding 

Number

.

To have IntraMail request Automated Attendant callers to select a Subscriber Mailbox to log into, enter 

N

 in the corresponding 

Number

 option. The key you choose must represent the 

fi

rst digit in the Sub-

scriber Mailbox numbers.

Summary of Contents for IntraMail 4

















































































































































































































































































Reviews: