Time and Date Stamp
176
◆
Chapter 2: Features
IntraMail System Guide
Time and Date Stamp
Description
While listening to a message, a Subscriber Mailbox user can dial
TI
to hear the Time and Date the message
was left. This is a handy option while reviewing messages. The subscriber can just dial a code to
fi
nd out
when the message arrived.
Time and Date Stamp with Caller ID
With caller ID installed, a mailbox user can dial
TI
while listening to a message to hear the time the message
was sent, as well as the caller’s number.
Related Features
After a user listens to a message, IntraMail can optionally announce the time and date the message was left.
With Caller ID installed and programmed, the Time and Date Stamp also includes the caller’s number.
Turn to this feature for additional listening options.
You can set the system Time and Date from the telephone system programming or using the User-Program-
mable Features.
Programming
To get Time and Date Stamp with Caller ID, be sure Caller ID is properly installed and programmed in the
connected telephone system.
Operation
Hearing the Time and Date a Message was Left
Log onto Subscriber Mailbox.
L
(5)
Access the Message Listen mode.
[LISTEN] - [LSTN]
TI
(84)
Hear the time and date the message was sent.
■
Turn to
on page 109 for more on your listening options.
0
Plays Help message
