8000 - Voice Mail
8001 - Voice Mail Setup
208
◆
Chapter 3: Programming
IntraMail System Guide
8000 - Voice Mail
8001 - Voice Mail Setup
Description
Use the
8001 - Voice Mail Setup
to enable IntraMail.
If you install IntraMail in a system that has no other
voice mail installed, the options below will be automatically set for you.
You do not need to make any entries.
Options
Voice Mail Type
(V-MAIL TYP)
Use this option to set the type of voice mail (I) connected to your system.
■
on page 6 for more on IntraMail installation and startup.
Options
■
E
(3) - External (such as VANGARD Mail).
■
I
(4) - IntraMail
■
UltraMail (set automatically if the UltraMail PCB is installed).
■
0
- None
Default
✔
With IntraMail (and no other voice mail) installed, the default for this option is
I
(4).
Voice Mail Master Extension Number
(V-MAIL MST EXT)
Use this option to set the voice mail master extension number (e.g., 700).
In most installations, you should
not change this option from its default setting (700).
■
on page 6 for more on IntraMail installation and startup.
Options
■
Any valid extension number within the system’s number plan.
Default
✔
700
8001 Program Entry
8001 - Voice Mail Setup Program Entry
(Entry Range) [Default Setting]
ICM
+
#*#*
+ Password (372000) +
HOLD
+
8001
+
HOLD
.
V-MAIL TYP
(Automatically set to INTRAMAIL when IntraMail is installed)
V-MAIL MST EXT
(Automatically set to 700 when IntraMail is installed)
Press this:
To do this:
HOLD
Enter (accept) data you entered.
CONF
Cancel your entry and back up to the previous prompt level.
VOL
▲
or Vol
▼
Scroll to the next prompt.
CHECK
Restore the previous entry.
