8000 - Voice Mail
8006 - IntraMail Routing Mailboxes
228
◆
Chapter 3: Programming
IntraMail System Guide
■
Options
■
Y
(Yes)
■
N
(No)
Default
✔
Y
(Yes)
Options for Call Routing Mailboxes
Dial Action Table
(DIAL ACTION TABLE)
Use this option to assign the Dial Action Table to the Call Routing Mailbox. The Dial Action Table de
fi
nes
the dialing options for the call Routing Mailbox.
■
Options
■
1-16
(Dial Action Table 1-16)
Default
✔
1
(Dial Action Table 1)
Screened Transfer Timeout
(SCRN TRF TIMEOUT)
Use this option to set how long a Screened Transfer (TRF) from the Automated Attendant will ring an unan-
swered extension before recalling.
■
This option has a similar function as
Customize: Mailbox Options: Call Routing: [Call Handling]
Options: Delay Rings Before Redirect Transfer
in UltraMail.
■
The
0401-Transfer Recall
interval has no interaction with this timer.
■
Options
■
0-255
seconds
- Entering 0 causes immediate recall.
Default
✔
15
seconds
Time Limit for Dialing Commands
(DIALING TIMEOUT)
This option determines how long IntraMail will wait for an Automated Attendant caller who doesn’t dial
before routing the call to the Timeout destination.
■
Be sure your Dial Action Tables have a Timeout action programmed.
■
If the caller waits too long to dial:
■
When the associated Dial Action Table has a Timeout action programmed, the caller routes to that des-
tination.
■
When the associated Dial Action Table does not have a Timeout action programmed, the Instruction
Menu repeats 3 times and then IntraMail hangs up.
Options
■
0-99
seconds
- Entering 0 causes the Automated Attendant to immediately route callers to the Timeout destination
programmed in the active Dial Action Table.
Default
✔
5
seconds
