Flexible Mailbox Numbering Plan
IntraMail System Guide
Chapter 2: Features
◆
89
2
Flexible Mailbox Numbering Plan
Description
If the telephone system extension numbers are changed or swapped, IntraMail will automatically change the
Subscriber Mailbox numbers to match. There is no extensive reprogramming required. After the swap, all of
the subscriber’s messages and options are available at their new extension number. Flexible Mailbox Num-
bering Plan lets you customize a site’s extension numbers and be assured that IntraMail will automatically
adapt to the new con
fi
guration.
Two-digit extension/mailbox numbering is not supported in IntraMail.
Related Features
Be sure the Dial Action Table actions accommodate the revised telephone system numbering.
Programming
Flexible Numbering Plan Example
The following example illustrates how to accommodate extension number 800 assigned to station number 2.
Step 1
In DS1000/2000 programming, assign extension number 800 to station 2.
1.1
In
0501 - Numbering Plan
, be sure the Digit 8 Options
Function Type
is 2 (Extension) and the
Expected Digits
is 3.
1.2
In 0502 - Extension Numbering, select station 2 and assign extension number 800.
Step 2
Customize the active Dial Action Tables to allow Automated Attendant callers to dial the new
extension.
2.1
8008 - IntraMail Dial Action Tables
- For key 8 enter
UTRF
(or TRF) for the
Action
and
XXX
for the corresponding
Number
.
✔
By default, key 8 is
UND
(unde
fi
ned).
Operation
N/A
