background image

 

 

 

Thank you for choosing the  

IW STAND

 for your NEC

 

Interactive WhiteBoard.  

 

 

SAFETY INFORMATION

 

 

Please read, understand, and follow all safety information contained in these instructions prior to the 
use of this Mobile Whiteboard Stand.   

 

Retain these instructions for future reference. 

 

Intended Use: 

 

The IWSTAND was intended for indoor use with the IW77 Interactive Whiteboard  only. Use outdoors or on an unstable 
or unlevel floor is not recommended and could create a potentially unsafe operating condition.  

 

Use of replacement parts, or installation instructions other than described in this manual has not been evaluated by NEC 
and may lead to an unsafe condition. 

 

This stand is not intended for use by unsupervised children.

 

Explanation of Signal Words and Symbols in Safety Labels and Instructions

 

 WARNING:   

 

Indicates a potentially hazardous situation, which if not avoided,  

                                       could result in death or serious injury. 

 

                          

 

 CAUTION: 

 

Indicates a potentially hazardous situation, which if not avoided,  

                 may result in minor or moderate injury. 

 

 

          

Risk from muscular strain

 

To reduce the risk associated with muscle strain and/or pinch: 

 

-   

Use care when lifting and placing the 

IW77 Interactive Whiteboard

 on the Stand

 

 

-   This product is intended to be used with the NEC

 Interactive White B

oard only. 

 

-   Before using, make sure that all the wheels are in the locked position. 

 

 

-   Use care when placing the Whiteboard on the Floor Stand to prevent 

                  pinching of hand or fingers between mating parts. 

      

To reduce the risk associated with impact or falling: 

         

-   Always provide proper adult supervision when using this 

Floor Stand 

around children. 

 

-   Do not allow children to stand or hang on to any part of this product.

 

 

 

 

 

   © NEC Display Solutions of America, All Rights Reserved, 2007 

IWSTAND

 Assembly Instructions 

WARNING

 

NEC

 

is a registered trademark of NEC Corporation 

 

Summary of Contents for IW77









Reviews: