11
Turning Power On and Off
To turn the LCD MONITOR power ON/OFF, press the POWER
button or the ON/OFF button on the remote control.
The power lamp will light and turn to green, the LCD MONITOR
will turn on.
z
Note: During normal use, the main power switch is set in the ON position.
Power lamp
Power
lamp
Power
lamp
Operation
Off Off
The OFF button on the remote control or
the POWER button is OFF.
Lights green
On
When the power switch is ON, and the
ON button on the remote control or the
POWER button is ON.
Lights orange
On
When the power switch is ON, and the
PC is in power save mode.
When the indicator lamp lights orange or the message “No cable
connected” or “Going to sleep” appears on the screen, there is
something abnormal about the status of the reception.
See Trouble Shooting.
CAUTION
z
Avoid repeatedly turning the LCD MONITOR on and off at short time
intervals. Failures might result from doing so.
z
If a power failure occurs while the main unit is running, it will be powered
on upon recovery from the failure. To prevent the power from returning
unexpectedly, possibly causing damage, turn off the main power switch
when after power failure occurs. Unplug the AC power source to the AC
adapter for 30 seconds to reset the unit.
Power Lamp
POWER button
POWER
ON/OFF
button
Operating Instructions
