E-83
USING ON-SCREEN MENU
⬎
Menu Descriptions & Functions
LAN
Selects a signal from a LAN card plugged into the projector's card slot.
Entry List
Displays the list of the entry signals. Use the SELECT
buttons on
your remote control or the projector cabinet to select the signal and
press the ENTER button on the remote control or the projector cabinet
to display the Entry Edit Command screen.
Using the Entry List
Making any adjustments to the current picture will automatically regis-
ter its adjustments to the Entry List. The registered signal can be loaded
any time from the Entry List.
NOTE: Up to 100 presets can be registered.
Entry Edit Command
You can edit signals on the Entry List.
Load:
Enables you to select a signal from the list.
Store:
Enables you to store the currently projected signal.
Cut
: Enables you to remove a selected signal from the list and place it
on the "clipboard" in the projector.
Copy:
Enables you to copy a selected signal from the list and place it
on the "clipboard" in the projector.
Paste:
Enables you to paste the signal placed on the "clipboard" to any
other line of the list. To do this, select "Paste" and then select the line
number you want to paste to. Last press ENTER.
Edit:
Enables you to change source names or add source names to
"More" in the Sorce Select.
Source Name:
Enter a signal name. Up to 18 alphanumeric characters
can be used.
Input Terminal:
Change the input terminal. RGB1 and RGB2 are avail-
