manualshive.com logo in svg

NEC M100, User Manual

The Samsung M100 User Manual is a comprehensive guide designed to help you unleash the full potential of your device. This manual provides step-by-step instructions, troubleshooting tips, and useful insights to enhance your user experience. Download it for free from 88.208.23.73:8080 to get the most out of your Samsung M100.

Share
Download
background image

Release 6.0

12

User Guide

 Figure C-24:  iSCSI Initiator Properties (Targets Tab) Screen......................................................................341
 Figure C-25:  Log On to Target Screen.........................................................................................................342
 Figure C-26:  Advanced Setting (General Tab) Screen ................................................................................343
 Figure C-27:  Log On to Target Screen.........................................................................................................344
 Figure C-28:  iSCSI Initiator Properties (Targets Tab) Screen......................................................................346
 Figure C-29:  Log On to Target Screen.........................................................................................................347
 Figure C-30:  Advanced Setting (General Tab) Screen ................................................................................348
 Figure C-31:  Log On to Target Screen.........................................................................................................349
 Figure C-32:  iSCSI Initiator Properties (Target Tab) Screen .......................................................................350
 Figure C-33:  Computer Management - Device Manager .............................................................................351
 Figure C-34:  Computer Management - Disk Management ..........................................................................352
 Figure D-1:  BACS4 Start Screen ...............................................................................................................357
 Figure D-2:  Screen Displayed Immediately After Starting BACS4.............................................................358
 Figure D-3:  iSCSI Adapter - Configuration Tab..........................................................................................359
 Figure D-4:  iSCSI IPv4 Configurations Tab ...............................................................................................360
 Figure D-5:  Setting Change Confirmation Screen......................................................................................361
 Figure D-6:  Warning Message Dialog Box.................................................................................................361
 Figure D-7:  iSCSI Initiator Properties - Configuration Tab .........................................................................362
 Figure D-8:  iSCSI Initiator Properties - Discovery Tab...............................................................................363
 Figure D-9:  Discover Target Portal Dialog Box ..........................................................................................364
 Figure D-10:  Advanced Settings - Local Adapter Setup ..............................................................................365
 Figure D-11:  Advanced Settings - Initiator IP Setup ....................................................................................366
 Figure D-12:  Discover Target Portal Dialog Box ..........................................................................................367
 Figure D-13:  Authorization Failure Dialog Box.............................................................................................367
 Figure D-14:  Discovery Tab .........................................................................................................................368
 Figure D-15:  iSCSI Initiator Properties - Targets Tab ..................................................................................370
 Figure D-16:  Connect To Target Dialog Box................................................................................................371
 Figure D-17:  Advanced Setting - General Tab.............................................................................................372
 Figure E-1:

 Getting Started - Host Information...........................................................................................377

 Figure E-2:

 Set Host Information - Select How to Set................................................................................378

 Figure E-3:

 Set Host Information - Specifying Host Information File .........................................................379

 Figure E-4:

 Host Information Collection - Completion................................................................................380

 Figure F-1:

 Unit with NF53x1-xF21xx (10Gbps iSCSI 2port Controllers) ..................................................387

 Figure F-2:

 Unit with NF53x1-xF11xx (1Gbps iSCSI 2port Controllers) ....................................................387

 Figure F-3:

 Configuration Example............................................................................................................388

 Figure H-1:  Unit with NF53x1-xF21xx (10Gbps iSCSI 2port Controllers) ..................................................404
 Figure H-2:  Unit with NF53x1-xF11xx (1Gbps iSCSI 2port Controllers) ....................................................404
 Figure H-3:  Configuration Example............................................................................................................405
 Figure H-4:  VMware Infrastructure Client Layout Screen ..........................................................................406
 Figure H-5:  Add Network Wizard Screen (1)..............................................................................................407
 Figure H-6:  Add Network Wizard Screen (2)..............................................................................................407
 Figure H-7:  Add Network Wizard Screen (3)..............................................................................................408
 Figure H-8:  Warning Screen ......................................................................................................................408
 Figure H-9:  DNS and Routing Configuration Screen .................................................................................409
 Figure H-10:  Add Network Wizard Screen (4)..............................................................................................410
 Figure H-11:  Add Network Wizard Screen (5)..............................................................................................411

Summary of Contents for M100












































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for M100

eMoMo Remo4 Quick Start Manual preview
Remo4
Brand: eMoMo Pages: 2
Twin-Star International Bell'O Digital BDSW-1650-BLK Manual preview
Bell'O Digital BDSW-1650-BLK
Brand: Twin-Star International Pages: 20
Advanced Native Technologies iROLLER 10 User Manual preview
iROLLER 10
Brand: Advanced Native Technologies Pages: 29
RCA RS2696i User Manual preview
RS2696i
Brand: RCA Pages: 2
RCA RS3697BL User Manual preview
RS3697BL
Brand: RCA Pages: 13
Black Box Duplex Fiber Optic Cable Brochure preview
Duplex Fiber Optic Cable
Brand: Black Box Pages: 4
Void L2 Owner'S Manual preview
L2
Brand: Void Pages: 8
LEMEGA M3 Owner'S Manual preview
M3
Brand: LEMEGA Pages: 17
Kinyo MS-150 User Manual preview
MS-150
Brand: Kinyo Pages: 7
K-array Piccolo User Manual preview
Piccolo
Brand: K-array Pages: 28
K-array KB1 User Manual preview
KB1
Brand: K-array Pages: 44
Hyundai H-MS1100 Instruction Manual preview
H-MS1100
Brand: Hyundai Pages: 22
Hisense HA450 User Manual preview
HA450
Brand: Hisense Pages: 15
Rain Bird COMMODORE 64/128K User Manual preview
COMMODORE 64/128K
Brand: Rain Bird Pages: 98
Zenith FFH-586A Installation And Operating Manual preview
FFH-586A
Brand: Zenith Pages: 20
Bang & Olufsen BeoCenter 2 User Manual preview
BeoCenter 2
Brand: Bang & Olufsen Pages: 44
Panasonic SC-PM47 Operating Instructions Manual preview
SC-PM47
Brand: Panasonic Pages: 32
Panasonic SC-PM28 Operating Instructions Manual preview
SC-PM28
Brand: Panasonic Pages: 32

Brands by name

Popular brands

Load more brands