If FC, choose
8/16Gb FC 2/4/8 ports
.
If 1Gb iSCSI, choose
1Gb iSCSI Copper 2/4/8 ports
.
If 10Gb iSCSI, choose
10Gb iSCSI Copper/Optical 2/4/8 ports
.
If 12Gb SAS, choose
12Gb SAS 4/8 ports
.
If Combo, choose
8/16Gb FC 2/4 ports
and
1/10Gb iSCSI
Copper/Optical 2/4 ports.
Ø
Refer to M110 Component Selection (2-1): Product List,
b) Host Port Card
Ø
Refer to M110 Component Selection (2-3) Choose Host
I/F
Choose Dual Controller Configuration (Controller card x 2)
Ø
Refer to M110 Component Selection (2-4): Dual
Controller vs. Single Controller
Choose M110 Disk Array Unit (
2.5” model
)
Ø
Refer to M110 Component Selection (2-1): Product List,
a) Base Unit
2. M110 Component Selection (4)
(1) System Requirement and Recommended Product
Choose Single Controller Configuration (Controller Card x
1)
Ø
Refer to M110 Component Selection (2-4): Dual
Controller vs. Single Controller
YES
NO
(3) High reliability and
availability are required.
YES
(2) Space-saving is
required.
(1) Host I/F is determined.
(4) Low cost is required.
YES
YES
An M110 Disk Array Unit does not include disk drives. A controller unit is not included with a base unit.
Both the array controller unit and a controller card are required. The following steps and lists are
references for choosing an appropriate product combination.
9
NEC Confidential
