(4-2) Disk Capacity
(Considerations for System Volume)
A system volume, in which performance logs, etc. are automatically saved, is created in the first
binding Pool. System volume capacity is 8.0 GB. (or 8.6GB if 1KB = 1000Byte)
(Considerations for Snapshot)
When using the snapshot feature, it is necessary to create a snapshot reservation area for replication
of a master volume (snapshot).
(Considerations for Replication)
When implementing the replication feature, use the storage system information retention function
*
and
create a replication reserved volume with the NEC StorageManager application. The capacity of a
replication reserved volume is 8.0GB. (or 8.6GB if 1KB = 1000Byte)
When turning power off via a planned shutdown all storage system information (differential map, etc)
will be backed up onto the replication reserved volume only if it was configured. If the replication
reserved volume is not configured then storage system information will be lost on shutdown. When
restarting after a planned shutdown, I/O load will be generated as data on the MV is fully copied to the
RV. This startup load may be large enough to temporarily affect performance. It is recommended to
operate 24 hours nonstop, especially if running without a replication reserved volume.
* Storage system information retention function is used to backup storage system information such as
the differential map between business volume (MV) and replication volume (RV) onto disk drives.
2. M310 Component Selection (11)
When deciding how many disk drives are required, remember that logical disk capacity varies
depending on both disk drive type (I/F, capacity) and RAID type. The amount of required logical disk
capacity varies depending on the amount of data usage and whether or not specific features (Snapshot,
Replication) are required. Using estimated logical disk capacity and desired performance, the number
of disk drives can be estimated. Include all relevant topology factors (I/F, capacity, rotation speed,
RAID type) when calculating capacity. A minimum of
three disk drives
is required.
Refer to “(4-4) Supported RAID” for supported RAID types.
(4) Disk Drive
(4-1) Disk Drive
Slots #00, #01, and #02 must be populated
.
41
NEC Confidential
#00
#01
#02
#03
#04
#05
#06
#07
#08
#09
#0A
#0B
#1
7
・・・
#0
0
#0
1
#0
2
#0
3
