English-21
English
VIDEO DETECT*
1
Selects the video detection method, when more than one video signal source is
connected. Press “LEFT” or “RIGHT” to select.
FIRST: When current video input signal is not present, then the monitor searches for a video
signal from a different video source. If a video signal is supplied by the other video source,
the monitor automatically switches to the new video source. The monitor will not look for any
other video signals, as long as the current video signal is present.
LAST: When the monitor is displaying a signal from the current video source and a new
secondary video source is supplied to the monitor, then the monitor will automatically switch
to the new video source. When current video input signal is not present, then the monitor
searches for a video signal from a different video source. If a video signal is supplied by the
other video source, the monitor automatically switches to the new video source.
NONE: The monitor will not search for any other video sources, unless the monitor is
turned OFF and ON again with the Power button.
SIDE BORDER
COLOR
Adjusts the side black bars color between black and white.
LED BRIGHTNESS*
1
Controls the brightness of the power LED on the monitor.
QA TEST*
1
Provides a quick daily visual image quality check of this diagnostic monitor by just using
a button on the monitor. See page 17.
Tag6
LANGUAGE*
1
The OSD control menus are available in nine languages. Press “LEFT” or “RIGHT” to
select.
OSD H.POSITION
You can choose where you would like the OSD control menu to appear on your screen.
Selecting OSD Location allows you to manually adjust the position of the OSD control
menu left or right.
OSD V.POSITION
You can choose where you would like the OSD control menu to appear on your screen.
Selecting OSD Location allows you to manually adjust the position of the OSD control
menu up or down.
OSD TURN OFF
The OSD control menu will stay on as long as it is used. You can select how long the
monitor waits after the last touch of a button to shut off the OSD control menu.
The preset choices are 10-120 seconds in 5 second increments.
OSD LOCK OUT*
1
This control completely locks out access to all OSD control functions. When attempting
to activate OSD controls while in the Lock Out mode, a screen will appear indicating the
OSD controls are locked out.
There are two types of OSD LOCK OUT:
OSD LOCK OUT with no control: To activate the OSD Lock Out function, press SELECT,
then “RIGHT” button and hold down simultaneously. To deactivate the OSD Lock Out,
press SELECT, then “RIGHT” button and hold down simultaneously while in the OSD
menu. No controls can be adjusted while in the lock out mode.
CUSTOM: Press RESET and EXIT to enter the CUSTOM Menu. Select ENABLE or
DISABLE for INPUT SEL, PICTURE MODE and WARNING (OSD LOCK OUT), then
press SELECT. To Deactivate the OSD Lock Out function, press RESET and EXIT to
bring up the LOCK OUT warning.
Press SELECT, SELECT, LEFT, RIGHT, LEFT, RIGHT, EXIT.
NOTE: OSD control menu will disappear after the time set in OSD TURN OFF or when
EXIT button is pressed.
Quick screen QA test function is not locked out.
OSD COLOR*
1
“Tag window frame color”, “Item select color” & “Adjust Window frame color” can be
changed.
BOOT LOGO*
1
The NEC logo is briefl y displayed after the monitor is powered on. This feature can be
turned on or off in the OSD.
Note: If the “EXIT” button is kept pressed while NEC logo is displayed, the BOOT LOGO
menu will appear. It is possible to change the BOOT LOGO setting to OFF.
SIGNAL
INFORMATION*
1
Signal information can be displayed in the corner of the screen.
Signal information is either “ON/OFF”.
FACTORY PRESET
Selecting FACTORY PRESET allows you to reset all OSD control settings back to the
factory default settings, except those items which are marked with *
1
. Highlighting a
specifi c OSD control item to be reset and pressing the RESET button can reset individual
OSD settings.
*1 This item will not be reset during a FACTORY PRESET.
