176
CHAPTER 8 16-BIT TIMER/EVENT COUNTER
User’s Manual U12697EJ3V0UM
Figure 8-26. Timing of One-Shot Pulse Output Operation by Software Trigger
Sets 0CH to TMC0
(TM0 count starts)
Count clock
0000
0001
0000
TM0 count value
M
N
CR01 set value
CR00 set value
OSPT
INTTM01
INTTM00
TO0 pin output
N + 1
M – 1
M + 1 M + 2 M + 3
M
N
M
N
M
N
N
N
N – 1
M
Cautions 1. 16-bit timer counter 0 starts operating as soon as a value other than 0, 0 (operation stop
mode) has been set to TMC02 and TMC03.
2. The software trigger (bit 6 (OSPT) of 16-bit timer output control register 0 (TOC0) = 1) and
the external trigger (TI00 input) are always valid in one-shot pulse output mode.
If the software trigger is used in one-shot pulse output mode, the TI00 pin cannot be used
as a general-purpose port pin. Therefore, fix the TI00 pin to either high level or low level.
