561
APPENDIX B DEVELOPMENT TOOLS
User’s Manual U12697EJ3V0UM
B.3 Debugging Tools
B.3.1 Hardware (1/2)
(1) When using in-circuit emulator IE-78K4-NS
IE-78K4-NS
In-circuit emulator to debug hardware and software when developing application
In-circuit emulator
systems using the 78K/IV Series. Supports the integrated debugger (ID78K4-NS). Use
in combination with an interface adapter to connect to the power supply unit, emulation
probe, and host machine.
IE-70000-MC-PS-B
Adapter to supply power from a socket of AC 100 V to 240 V
Power supply unit
IE-70000-98-IF-C
Interface adapter required when a PC-9800 series PC (except notebook type) is used
Interface adapter
as the host machine for the IE-78K4-NS (C bus supported)
IE-70000-CD-IF-A
PC card and interface cable required when a notebook PC is used as the host
PC card Interface
machine for the IE-78K4-NS (PCMCIA socket supported)
IE-70000-PC-IF-C
Interface adapter required when using an IBM PC/AT compatible as the host machine
Interface adapter
for the IE-78K4-NS (ISA bus supported)
IE-70000-PCI-IF-A
Interface adapter required when using a PC that incorporates PCI bus as the host
Interface adapter
machine for the IE-78K4-NS
IE-784225-NS-EM1
Board to emulate the peripheral hardware specific to device. Used in combination with
Emulation board
an in-circuit emulator.
NP-80GK
Probe used to connect the in-circuit emulator and the target system. This is for an 80
Emulation probe
pin plastic TQFP (fine pitch) (GK-9EU type).
TGK-080SDW
Conversion adapter to connect the NP-80GK and a target system board on which an
Conversion adapter
80-pin plastic TQFP (fine pitch) (GK-9EU type) can be mounted
(refer to
Figure B-4
)
NP-80GC
Probe used to connect the in-circuit emulator and the target system. This is for an 80
Emulation probe
pin plastic QFP (GC-8BT type).
EV-9200GC-80
Conversion socket to connect the NP-80GC and a target system board on which an
Conversion socket (refer
80-pin plastic QFP (GC-8BT type) can be mounted
to
Figures B-2
and
B-3
)
Remarks 1.
The NP-80GK and NP-80GC are products made by Naito Densei Machida Mfg.Co., Ltd.
For further information, contact Naito Densei Machida Mfg. Co., Ltd. (TEL: +81-44-822-3813)
2.
The TGK-080SDW is a product made by Tokyo Eletech Corporation.
For further information, contact Daimaru Kogyo, Ltd.
Tokyo Electronics Department (TEL: +81-3-3820-7112)
Osaka Electronics Department (TEL: +81-6-6244-6672)
3.
The EV-9200GC-80 is sold in sets of 5.
4.
The TGK-080SDW is sold individually.
