562
APPENDIX B DEVELOPMENT TOOLS
User’s Manual U12697EJ3V0UM
B.3.1 Hardware (2/2)
(2) When using in-circuit emulator IE-784000-R
IE-784000-R
The IE-784000-R is an in-circuit emulator common to the 78K/IV Series, and is used in
In-circuit emulator
combination with IE-784000-R-EM and IE-784225-NS-EM1, which are sold separately.
This in-circuit emulator debugs the connected host machine. An integrated debugger
(ID78K4) and device file (sold separately) are required to enable debugging in C
language and structured assembly language at the source program level. More
efficient debugging and program verification is possible with functions such as C0
coverage. Connect to a host machine via Ethernet
TM
or a dedicated bus. An interface
adapter (sold separately) is required for connection.
IE-70000-98-IF-C
Interface adapter required when a PC-9800 series (except notebook type PC) is used
Interface adapter
as the host machine for the IE-784000-R (C bus supported)
IE-70000-PC-IF-C
Interface adapter required when using an IBM PC/AT compatible as the host machine
Interface adapter
(ISA bus supported)
IE-78000-R-SV3
Interface adapter and cable required when an EWS is used as the host machine for
Interface adapter
the IE-784000-R. Connect to a board inside the IE-784000-R.
Note that 10Base-5 is supported as the Ethernet. A commercial conversion adapter is
required for other systems.
IE-784000-R-EM
Emulation board common to 78K/IV Series
IE-784225-NS-EM1
Board to emulate peripheral hardware specific to device
Emulation board
IE-78K4-R-EX2
Conversion board for 80-pin packages required when using the IE-784225-NS-EM1 on
Emulation probe conversion board
IE-784000-R
EP-78054GK-R
Probe to connect the in-circuit emulator and the target system. For 80-pin plastic
Emulation probe
TQFP (fine pitch)(GK-9EU type).
TGK-080SDW
Conversion adapter to connect the EP-78054GK-R and a target system board on
Conversion adapter
which an 80-pin plastic TQFP (fine pitch)(GK-9EU type) can be mounted
(refer to
Figure B-4
)
EP-78230GC-R
Probe to connect the in-circuit emulator and the target system. For 80-pin plastic QFP
Emulation probe
(GC-8BT type).
EV-9200GC-80
Conversion socket to connect the EP-78230GC-R and a target system board on which
Conversion socket
an 80-pin plastic QFP (GC-8BT type) can be mounted
(refer to
Figures B-2
and
B-3
)
Remarks 1.
The TGK-080SDW is a product made by Tokyo Eletech Corporation.
For further information, contact Daimaru Kogyo, Ltd.
Tokyo Electronics Department (TEL: +81-3-3820-7112)
Osaka Electronics Department (TEL: +81-6-6244-6672)
2.
The EV-9200GC-80 is sold in sets of 5.
3.
The TGK-080SDW is sold individually.
