English-10
Remove Monitor Stand for Mounting
To prepare the monitor for alternate mounting purposes:
1. Disconnect all cables.
2. Place a hand on each side of the monitor and lift up to the highest position.
3. Place monitor face down on a non-abrasive surface (
Figure S.1
).
NOTE:
Handle with care when the monitor is facing down.
4. Remove the 4 screws connecting the stand to the monitor (
Figure S.1
).
NOTE:
In order to avoid stand drop, when removing screws, please support stand with your hand.
5. Remove the stand (
Figure S.2
).
6. The monitor is now ready for mounting in an alternate manner.
7. Connect the cables to the back of the monitor.
NOTE:
Handle with care when removing monitor stand.
Figure S.1
Figure S.2
8. Reverse this process to re-attach stand.
NOTE:
Use only VESA-compatible alternative mounting method.
Handle with care when removing stand.
NOTE:
Match “TOP SIDE” mark on stand to top side of the monitor head when re-attaching stand.
“TOP SIDE” mark
Please match top side
of the monitor
