English-15
English
OSD TOOL
LANGUAGE
OSD control menus are available in nine languages.
OSD
TURN
OFF
The OSD control menu will stay on as long as it is in use. In the OSD TURN OFF sub menu, you can select how
long the monitor waits after the last touch of a key to shut off the OSD control menu. The preset choices are
10 - 120 seconds by 5 seconds step.
OSD LOCK OUT
This control completely locks out access to all OSD control functions except for VOLUME, BRIGHTNESS and
CONTRAST. To activate the OSD LOCK OUT function, enter the OSD TOOL sub menu, select “OSD LOCK OUT”,
touch and hold the “INPUT/RESET” key and “+” simultaneously until “OSD LOCKED OUT” indicator appears. To
deactivate, touch the SELECT key, then repeat the same steps until OSD main menu displays on screen.
SIGNAL
INFORMATION
If you select “ON”, monitor displays “VIDEO INPUT MENU” after changing the input.
If you select “OFF”, monitor doesn’t display “VIDEO INPUT MENU” after changing the input.
OSD Warning
OSD Warning menus disappear by touching the SELECT key.
NO SIGNAL:
This function gives a warning when there is no signal present. After power is turned on or when there is a
change of input signal or video is inactive, the
NO SIGNAL
window will appear.
OUT OF RANGE:
This function gives a recommendation of the optimized resolution and refresh rate. After the power
is turned on or there is a change of input signal or the video signal doesn’t have proper timing, the
OUT OF RANGE
menu will appear.
