background image

English-21

English

Features

3-side arrow BezelE:

 Stylish appearance and less distance between adjacent screens in a multi-monitor setup.

SuperSpeed USB HubE:

 The USB hub adds flexibility to your computing by providing easy access to SuperSpeed USB data 

transfer and charging via USB. For more details, please see 

page 19

.

Various Signal InterfacesE:

 This model has various interfaces. Fore more detail, please see 

page 11

.

Fully Ergonomic Monitor StandE:

 Provides viewing flexibility with 110 mm height adjustment, -5 ~ 25-degree tilt, 45-degree 

swivel to both right/left directions, with cable management and a small footprint. The ability to pivot to either side can minimize 
width between adjacent bezels in multi-monitor installations. The bottom of the monitor cabinet can touch the monitor stand 
base for lower positioning requirements.

ErgoDesign FeaturesE:

 Enhance human ergonomics to improve the working environment, protect the health of the user 

and save money. The ergonomic features include a fully articulating monitor stand, OSD controls for quick and easy image 
adjustment, and lower emissions.

VESA Plate for Ohin Client Computer*E:

 Provides the ability to mount a thin client computer on the monitor stand pole using the 

included VESA plate.

VESA Standard Mounting InterfaceE:

 Connects the monitor to any VESA standard third party mounting arm or bracket.

Color Control SystemsE:

 Adjusts the colors on the screen and allows customization of the color accuracy of the monitor to a 

variety of standards.

NSD (Nn-Screen Display) ControlsE:

 Provides access for quick and easy adjustment to all elements of the screen image via 

simple to use on-screen menus.

aViSet Administrator 2 SoftwareE:

 Offers an expanded and intuitive graphical interface, allowing adjustments of the OSD 

display settings from a network PC.

o Oouch Auto Adjust (Analog input only)E:

 Automatically adjusts the monitor to optimal settings upon initial setup.

Plug and PlayE:

 The Microsoft

®

 solution with the indows

®

 operating system facilitates setup and installation by allowing the 

monitor to send its capabilities (such as screen size and resolutions supported) directly to the computer, automatically optimizing 
display performance.

Intelligent Power Manager SystemE:

 Provides innovative power-saving methods that allow the monitor to shift to a lower-

power mode when on but not it use, reducing emissions and lowering the cost of operating the monitor by reducing its power 
consumption.

FullScan CapabilityE:

 Allows use of the entire screen area in most resolutions, significantly expanding the image size.

Low Blue LightE:

 Low Blue Light function substantially reduces blue light and helps to alleviate eye-strain (see 

page 16

).

Flicker FreeE:

 Special backlight system reduces flicker for less eyestrain.

Environmental ImpactE: 

Annual typical maximum operating carbon footprint of this monitor (world-wide average) is 

approximately 35.5 kg (calculated by: rated wattage x 8 hours per day x 5 days a week x 45 weeks per year x Power-to-Carbon 
conversion factor - conversion factor is based on OECD publication of global CO2 emissions 2008 Edition). 
This monitor has a manufacturing carbon footprint of approximately 59.8 kg. 

oteE:

 The manufacturing and operating carbon footprints are calculated by a unique algorithm developed exclusively by NEC 

for its monitors and are accurate at the time of printing. NEC reserves the right to publish updated carbon footprint values.

* Depending on the country where the LCD monitor is shipped to, the VESA Plate is not included in the box contents.

Summary of Contents for MultiSync E242N


























Reviews: