5
OSM
™
(On-Screen Manager) control buttons on the front of the monitor function
as follows:
Main Menu
Sub-Menu
EXIT
Exits the OSM menu.
Exits to the OSM controls
main menu.
CONTROL
Moves the highlighted
Moves the highlighted area
/
area left/right to select
left/right to select one of the
one of the sub-menus.
controls.
CONTROL
Has no function.
Moves the bar in the – or +
–/+
direction to decrease or
increase the adjustment.
SELECT
(FE990)
Enters sub-menu.
Has no function.
SELECT/
SBMODE
(FE791SB/FE991SB)
RESET
Resets all the controls within
Resets the highlighted control
the highlighted menu
to the factory setting.
to the factory setting.
NOTE:
When
RESET
is pressed in the main and sub-menu, a warning window will appear
allowing you to cancel the reset function.
NOTE:
(FE791SB/FE991SB) When the OSM is off, it will act as the SuperBright (SB) function
key. User can select between SB MODE OFF, SB MODE1, and SB MODE2. The first
time this key is pressed, the current SB Mode is indicated. Within a 3 second window,
if this key is selected again, the SB MODE will change to the next SB MODE. For
example, the current mode is SB MODE OFF, the key is pressed twice within a 3
second time frame, the SB MODE will change to SB MODE1 and so on. The color
temperature at each SB Mode is adjusted by appropriate color control except for the
sRGB mode whose color setting cannot be adjusted. When the unit is turned off, it will
reset to SB off mode.
Brightness/Contrast Controls
Brightness:
Adjusts the overall image and background screen brightness.
Contrast:
Adjusts the image brightness in relation to the background.
Degauss:
Eliminates the buildup of stray magnetic fields which alter the correct
scan of the electron beams and affect the purity of the screen colors, focus and
convergence. When activated, your screen image will jump and waver a bit as
the screen is demagnetized.
Caution: Please allow a minimum of 20 minutes to elapse between uses
of the Degauss Control.
Size and Position Controls
Left/Right:
Moves the image horizontally (left or right).
Down/Up:
Moves the image vertically (up or down).
Narrow/Wide:
Decreases or increases the horizontal size of the image.
Short/Tall:
Decreases or increases the vertical size of the image.
Controls
MSFE791990991Manual.p65
8/29/02, 11:14 AM
5
