Connecting Your Document Camera
You can connect your MultiSync LT80 Projector to a document camera. To do so, simply:
1. Turn off the power to your projector and document camera.
2. Use a standard video cable to connect your document camera to the Video input on your projector.
3. Turn on the projector and the document camera.
NOTE: Refer to your document camera's owner's manual for more information about your camera's
video output requirements .
Connecting Your VCR, DVD Player Or Laser Disc Player
Use common RCA cables (not provided) to connect your VCR or laser disc player to your MultiSync
LT80 Projector. To make these connections, simply:
1. Turn off the power to your projector and VCR, DVD player or laser disc player.
2. Connect one end of your RCA cable to the video output connector on the back of your VCR, DVD
player or laser disc player, connect the other end to the Video input on your projector. Use standard
RCA audio patch cords to connect the audio from your VCR, DVD player or laser disc player to your
projector (if your VCR, DVD player or laser disc player has this capability). Be careful to keep your
right and left channel connections correct for stereo sound.
3. Turn on the projector and the VCR, DVD player or laser disc player.
NOTE: Refer to your VCR, DVD player or laser disc player owner's manual for more information about
your equipment's video output requirements.
45
Connecting An External Monitor
You can connect a separate, external monitor to your projector to simultaneously view on a monitor the
image you're projecting. To do so:
1. Turn off the power to your projector and computer, document camera or video source.
2. Use a 15-pin cable to connect your monitor to the RGB OUT connector on your LT80 projector.
3. Turn on the projector and the computer, document camera or video source.
INSTALLATION
46
