E–37
6. SPECIFICATIONS
This section provides technical information about the MultiSync LT84/LT140 Projector’s performance.
Model Number
LT84 / LT84G / LT140 / LT140G
Optical
DMD
TM
Single Chip Digital Micromirror Device(DMD
TM
), 800x600 dots (LT84) / 1024x768 dots (LT140)
Lens
Manual zoom, manual focus
LT84 : F3.0 – 3.3 f = 28 – 33 mm
LT140 : F2.7 – 3.0 f = 35 – 42 mm
Lamp
120 W P-VIP lamp
Image Size
25 – 300 inches (612.5 – 7620 mm) diagonal
Projection Distance
3.9 - 40 ft (1.2 - 12.2 m)
Electrical
Inputs
Video (NTSC / PAL / PAL60 / SECAM / NTSC4.43)
Horizontal Frequency : 15 – 85 kHz (RGB : 24 kHz or over)
Vertical Frequency : 50 – 85 Hz
Video Bandwidth
RGB: 80 MHz
Color
Reproduction Full color, 16.7 million colors simultaneously.
Horizontal Resolution
500 TV lines : NTSC / PAL / YCbCr
300 TV lines : SECAM
RGB
LT84 :
800 dots horizontal, 600 dots vertical
LT140 : 1024 dots horizontal, 768 dots vertical
Power Requirement
100 – 120 / 200 – 240 VAC, 50 / 60 Hz
Input Current
2.1 A (100 – 120 VAC) / 1.0A (200 – 240 VAC)
Mechanical
Dimensions
9.3" (W)
2
2.3" (H)
2
11.6" (D) / 235mm (W)
2
58mm (H)
2
294mm (D) (not including protrusions)
Net Weight
LT84: 5.5 lbs / 2.5 kg, LT140: 5.7 lbs / 2.6 kg
Environmental Considerations Operational Temperatures: 41˚ to 95˚F (5˚ to 35˚C), 30 to 85% humidity
Storage Temperatures:
14˚ to 140˚F (-10˚ to 60˚C), 30 to 85% humidity
Regulations
UL Approved (UL 1950, CSA 950)
Meets DOC Canada requirements
Meets FCC Class A requirements
Meets AS/NZS3548
Meets EMC Directive (EN55022, EN55024, EN61000-3-2, EN61000-3-3)
Meets Low Voltage Directive (EN60950, TUV GS Approved)
Digital Light Proccessing, DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments.
The specifications are subject to change without notice.
