16
7.Reference: Setting the Connection by Entering IP Address and Other Configurations
2
Click [Network].
The Network configuration window will be displayed.
3
Click [Location]
→
“New Location...”, enter a new location name, and click the
[OK] button.
4
Select “AirPort” in [Show].
• For wired LAN connection, click “Built-in Ethernet”.
SSID and WEP configurations are unnecessary for wired LAN.
5
Click the [TCP/IP] tab.
6
Select “Manually” in [Configure IPv4].
Entry fields for IP address, subnet mask and other configurations will be displayed.
7
Enter the IP address and subnet mask appropriate for the projector LAN.
As an example, set the IP address “192.168.100.20” and subnet mask “255.255.255.0”.
8
Click the [Apply Now] button.
Attempt to connect to the network set in [System Preference ...]
→
[Network]
→
[AirPort]
tab
→
[By default, join].
9
Click the [
] button at the upper left on the Network configuration window.
The Network configuration window will be closed.
9
Click
5
Click
4
Click
3
Click
6
Click
7
Enter
8
Click
