6
3.Setting the LAN Settings for the Projector
3. Setting the LAN Settings for the Projector
This section explains about “Easy Connection” using wireless LAN.
Refer to the manual attached to the projector to enable “Easy Connection”.
•
For LT265/LT245, refer to “User’s Manual (PDF)”
•
For LT380/LT280/WT615/WT610, refer to “Wired and Wireless Network Setup Guide”.
“Easy Connection” is
A unique communication mode that allows you to omit irksome configurations such
as IP address, subnet mask and etc. when connecting your personal computer to a
projector via wireless LAN.
1
Turn off the projector and insert the wireless LAN card into the projector.
2
Turn on the projector and press the <MENU> button to display the on-screen
menu.
3
Select [Setup]
→
[Installation] tab
→
[LAN Mode] from the on-screen menu.
The [LAN Mode] window will be displayed.
LT380/LT280/LT265/LT245
WT615/WT610
