English−55
Locking the Control Panel Buttons and key
The [KEY] in the [LOCK SETTINGS] prevents the monitor from being controlled using the buttons and key on the monitor
control panel. Enabling the [KEY] does not lock the buttons on the remote control.
SELECT
KEY
MODE UNLOCK
POWER
UNLOCK
/ LOCK
VOLUME
UNLOCK
/ LOCK
MIN VOL
10
MAX VOL
80
INPUT
UNLOCK
/ LOCK
PRESS TO EXECUTE
PROTECT:
POWER SAVE SETTINGS
THERMAL MANAGEMENT
SCREEN SAVER
POWER ON DELAY
SECURITY SETTINGS
LOCK SETTINGS
ALERT MAIL
RESET
1. Using the remote control, navigate to [PROTECT] then to [LOCK SETTINGS].
2. Under the [SELECT] option, press the
,
buttons to change the setting to [KEY].
3. Under [MODE] choose the lock mode you want to enable.
• [UNLOCK] – all keys are unlocked.
• [ALL LOCK] – all key buttons are locked.
• [CUSTOM LOCK] – all key buttons are locked except for the following buttons that can be individually set to be locked or
unlocked.
• [POWER] – select [UNLOCK] to be able to use the
⏻
button when the keys are locked.
• [VOLUME] – select [UNLOCK] to be able to control the volume with the
v
/
w
keys when the keys are locked. Select
[LOCK] to prevent volume adjustment.
• [MIN VOL] and [MAX VOL] – the
v
/
w
keys are unlocked and the volume can only be adjusted within the [MIN]
and [MAX] set.
The [VOLUME] must be set to [UNLOCK] for this setting to operate.
NOTEN:
Volume [MIN VOL]/[MAX VOL] lock only works with Internal speaker, Speaker Out connector and Audio
Line Out (3.5 mm connector). It does not work when [AUDIO RECEIVER] is set to [ENABLE].
• [INPUT] – select [UNLOCK] to be able to change the inputs using the INPUT button.
4. Select [SET] to activate all settings.
Unlocking the buttons and key on the monitor control panel
Key/Buttons – to return to normal operation unlock all the buttons/keys on the main unit control panel by pressing the
SET button and MENU/EXIT button on the main unit control panel at the same time for 3 seconds or longer.
OSD Menu – to return to normal operation, use the remote control to navigate to [PROTECT] then to [LOCK SETTINGS]. Under
the [SELECT] option, change the setting to [KEY]. Under [MODE] choose [UNLOCK] and then select [SET].
Locking the IR Remote Buttons and the Control Panel Buttons/key
Select [PROTECT]
➙
[LOCK SETTINGS]
➙
[SELECT]
➙
[KEY & IR] from the OSD menu.
For the subsequent setting procedure, buttons/keys for which the lock is enabled, and unlocking method, refer to
“Locking the Control Panel Buttons and key”
.
