NEC Display Solutions of America, Inc.
P402 Installation Guide
40” LCD Display
Rev 1.0
www.necdisplay.com
P462
Page 1 of 9
Contents:
Product Description and Notes
Page 1
Tilt
Angle
and
Rotation
Page 1
Ventilation Requirements
Page 2
Display Dimensions
Front, Top, Right and Left Side
Page 3
Rear & Bottom
Page 4
Display Dimensions w/Optional Stand
Page 5
Optional Table Top Stand Dimensions
Page 6
Optional Speaker Dimensions
Page 7
Dimensions with Optional Wall Mount (WMK-3257)
Page 8
Input
Panels
Page 9
Control Codes
Page 9
Product Description
Type:
LCD Display
Screen Surface:
Anti-Reflective
Resolution:
1920 x 1080
Dimensions without stand: 36.2”(W) x 21.0”(H) x 4.1”(D)
Aspect Ratio:
16:9
Dimensions with stand:
41.6”(W) x 25.4”(H) x 13.8” (D)
FCC:
Class
B
Weight
without
stand:
62.8
lbs
/
28.5
kg
Power Consumption:
145W (typ)
Weight with stand:
66.8 lbs / 30.3 kg
BTU’s:
494.76
BTU/hour
NOTES:
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
to fill the screen using the menus (see “Aspect Modes” in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted in the landscape position only.
Landscape/Portrait: 20deg
CLOCKWISE ROTATION ONLY
MAXIMUM TILT ANGLE
