English-19
English
Setting
Default
BRIGHTNESS
Adjusts the overall image and background brightness.
CONTRAST
Adjusts the image brightness in relation to the input signal.
NOTE: sRGB picture mode is standard and cannot be changed.
SHARPNESS
Adjusts the crispness of the image.
BLACK LEVEL
Adjusts the image brightness in relation to the background.
TINT
Adjusts the tint of the screen.
INPUT HDMI, DVD/HD, S-VIDEO, VIDEO1, VIDEO2 only
COLOR
Adjusts the color depth of the screen.
INPUT HDMI, DVD/HD, S-VIDEO, VIDEO1, VIDEO2 only
COLOR TEMPERATURE
Adjusts the color temperature of the entire screen. A low color temperature will make the screen reddish.
A high color temperature will make the screen bluish.
USER COLOR
Select the USER COLOR SETTING feature ON/OFF.
USER COLOR SETTING
Adjusts the levels of the Red, Yellow, Green, Cyan, Blue and Magenta.
Note: The sRGB picture mode is standard and cannot be changed.
It can be adjusted only when USER COLOR is selected ON.
GAMMA SELECTION
Select a display gamma for best picture quality.
NATIVE
Gamma correction is handled by the LCD panel.
2.2
Typical display gamma for use with a PC.
2.4
Good for video (TV, DVD, etc.)
S GAMMA
Special gamma for certain types of movies. Raises the dark parts and lowers the light parts of the image.
NOTE: sRGB picture is standard and cannot be changed.
NOISE REDUCTION
Adjusts the amount of noise reduction.
INPUT S-VIDEO, VIDEO1, VIDEO2 only
FILM MODE
Selects Film mode function. (AUTO)
INPUT HDMI, DVD/HD, S-VIDEO, VIDEO1, VIDEO2 only
This mode is better suited for movies, which is converted 24 Frames/sec source to DVD Video.
PICTURE RESET
Resets the all settings within the PICTURE menu back to factory setting.
AUTO SETUP
Press “SET” button to automatically adjust screen size, horizontal position, vertical position, clock, clock phase,
INPUT VGA, RGB/HV only
white level and black level.
AUTO ADJUST
Selecting ON when changing the timing, the horizontal position, vertical position and clock phase will adjust
INPUT VGA, RGB/HV only
automatically.
H POSITION
Controls the horizontal position of the image within the Display area of the LCD.
ALL inputs except DVI, HDMI
Press + to move right. Press - to move left.
V POSITION
Controls the vertical position of the image within the Display area of the LCD.
ALL inputs except DVI, HDMI
Press + to move up. Press - to move down.
CLOCK
Press + to expand the width of the image on the right of the screen.
INPUT VGA, RGB/HV only
Press - to narrow the width of the image on the left.
CLOCK PHASE
Adjusts the visual “noise” on the image.
INPUT VGA, RGB/HV only
ZOOM MODE
You can select “FULL”, “NORMAL”, “DYNAMIC”, “CUSTOM” and “REAL”.
NOTE: DYNAMIC is INPUT HDMI, DVD/HD, S-VIDEO, VIDEO1, VIDEO2 only.
Selecting DYNAMIC expands 4:3 picture to fill the screen. Some of the image is lost due to expansion.
Selecting “REAL” image will be displayed 1 by 1pixel.
CUSTOM ZOOM
“CUSTOM ZOOM” will be selected when you select “CUSTOM” on the screen “ZOOM” mode.
ZOOM
Expands the horizontal and the vertical size simultaneously.
H ZOOM
Expands the horizontal size only.
V ZOOM
Expands the vertical size only.
H POSITION
Moves to the right with + button. Moves to the left with - button.
V POSITION
Moves up with + button. Moves down with - button.
PICTURE
ADJUST
