background image

English-6

Installing a wire to a monitor with installed speakers 
(Landscape position only)

Please use speaker mounting parts to install a wire to the 
monitor.
Optional speaker is installed on the rear of the LCD monitor:

Optional speaker is installed on the side of the LCD monitor:

Mounting location 

•฀ The฀ceiling฀and฀wall฀must฀be฀strong฀enough฀to฀support฀the฀

monitor and mounting accessories.

•฀ DO฀NOT฀install฀in฀locations฀where฀a฀door฀or฀gate฀can฀hit฀

the unit. 

•฀ DO฀NOT฀install฀in฀areas฀where฀the฀unit฀will฀be฀subjected฀

to strong vibrations and dust.

•฀

DO NOT install the monitor next to a location where the 
main power supply is fed into the building.

•฀

DO NOT install the monitor in a location where people 
can easily grab and hang onto the unit or the mounting 
equipment.

•฀

Allow for adequate ventilation or provide air conditioning 
around the monitor, so that heat can properly dissipate 
away from the monitor and from the mounting equipment.

Mounting on ceilings

•฀ Ensure฀that฀the฀ceiling฀is฀sturdy฀enough฀to฀support฀the฀

weight of the unit and the mounting equipment over time, 
against earthquakes, unexpected vibrations, and other 
external forces.

•฀ Be฀sure฀the฀unit฀is฀mounted฀to฀a฀solid฀structure฀within฀

the ceiling, such as a support beam. Secure the monitor 
using bolts, spring lock washers, washer and nut.

•฀ DO฀NOT฀mount฀to฀areas฀that฀have฀no฀supporting฀internal฀

structure. DO NOT use wood screws or anchor screws for 
mounting. DO NOT mount the unit to ceiling or to hanging 
fixtures.

Maintenance 

•฀ Periodically฀check฀for฀loose฀screws,฀gaps,฀distortions,฀

or other problems that may occur with the mounting 
equipment. If a problem is detected, please refer to 
qualified personnel for service.

•฀ Regularly฀check฀the฀mounting฀location฀for฀signs฀of฀

damage or weakness that may occur over time. 

Orientation 

•฀ When฀using฀the฀monitor฀in฀the฀portrait฀position,฀it฀should฀

be rotated clockwise so that the left side is moved to 
the top, right side is moved to the bottom. This will allow 
for proper ventilation and will extend the lifetime of the 
monitor. Improper ventilation may shorten the lifetime of 
the monitor.

LED Indicator

Changing NEC logo ornament position

When using the monitor in the portrait position, the NEC logo 
ornament position can be changed.

Removing the logo ornament: unscrew the installed screw 
then take off the logo ornament.

Attaching the logo ornament: adjust the protrusions inside of 
the logo ornament into the protrusion hole on the bezel. Make 
sure the hole for the screw on the logo ornament and the 
hole for the screw on the bezel are aligned. Install the logo 
ornament with the screw, which is used for installing the logo 
ornament.
(Recommended Fasten Force: 30-40N

cm).

Inside of NEC logo ornament

Screw hole

Screw hole

Protrusion

Protrusion hole

 CAUTION:

   Do not use any other screw to install the logo 

ornament.

Summary of Contents for MultiSync V554












































































Reviews: