NEC MultiSync V554 User Manual Download

Page: 19 / 75

English-17

English

Connecting a Personal Computer

Connecting your computer to your LCD monitor will enable you to reproduce your computer’s video signal output.
Some display cards may not be able to support the required resolution for proper image reproduction.
Your LCD monitor shows proper image by adjusting the factory preset timing signal automatically.

Resolution

Scanning frequency

VGA

DVI

HDMI

DisplayPort

Remarks

Horizontal

Vertical

MODE1

MODE2

1.1a

1.2

640 x 480

31.5 kHz

60 Hz

Yes

800 x 600

37.9 kHz

60 Hz

Yes

1024 x 768

48.4 kHz

60 Hz

Yes

1280 x 720

45.0 kHz

60 Hz

Yes

1280 x 768

47.8 kHz

60 Hz

Yes

1280 x 800

49.7 kHz

60 Hz

Yes

1280 x 960

60.0 kHz

60 Hz

Yes

1280 x 1024

64 kHz

60 Hz

Yes

1360 x 768

47.7 kHz

60 Hz

Yes

1366 x 768

47.7 kHz

60 Hz

Yes

1400 x 1050

65.3 kHz

60 Hz

Yes

1440 x 900

55.9 kHz

60 Hz

Yes

1600 x 1200

75.0 kHz

60 Hz

Yes

Compressed image

1680 x 1050

65.3 kHz

60 Hz

Yes

1920 x 1080

67.5 kHz

60 Hz

Yes

Recommended resolution

1920 x 1200

74.6 kHz

60 Hz

Yes

Compressed image

1920 x 2160

133.3 kHz

60 Hz

Yes

Compressed image

3840 x 2160

65.7 kHz

30 Hz

Yes

Compressed image

3840 x 2160

67.5 kHz

30 Hz

Yes

Compressed image

3840 x 2160

133.3 kHz

60 Hz

Yes

Yes*

Compressed image

3840 x 2160

135.0 kHz

60 Hz

Yes

Yes*

Compressed image

4096 x 2160

54.0 kHz

24 Hz

Yes

Compressed image

*: Only HBR2 is set.

•฀ Input฀TMDS฀signals฀conforming฀to฀DVI฀standards.
•฀ To฀maintain฀

the image reproduction quality, use a cable that conforms to DVI standards.

Connecting a Player or Computer with HDMI

•฀฀ Please฀use฀a฀HDMI฀cable฀with฀the฀HDMI฀logo.
•฀฀ It฀may฀take฀a฀moment฀for฀the฀signal฀to฀appear.
•฀฀ Some฀display฀cards฀or฀drivers฀may฀not฀display฀an฀image฀correctly.
•฀฀ When฀you฀use฀a฀computer฀with฀HDMI,฀please฀set฀OVER฀SCAN฀to฀“AUTO”฀or฀“OFF”฀(see฀page฀34).
•฀฀

Please check display card when image is compressed with 1920 x 1080.

•฀฀

To output HDMI audio, set [HDMI1] or [HDMI2] at AUDIO INPUT in the OSD or choose [HDMI1] or [HDMI2] by the remote
control AUDIO INPUT button.

•฀฀

If the input resolution is 3840 x 2160 (60 Hz), please set MODE2 at HDMI in TERMINAL SETTINGS (See page 37).

•฀฀

If the monitor’s main power is turned on after a connected computer is turned on, sometimes images are not displayed.
In this case, please turn off the computer then turn it on again.

Connecting a Computer with DisplayPort

•฀ Please฀use฀a฀DisplayPort฀cable฀with฀the฀DisplayPort฀compliance฀logo.
•฀

To use the DisplayPort out connector, please refer to Video out (See page 61).

•฀ It฀may฀take฀a฀moment฀for฀the฀signal฀to฀appear.
•฀ When฀connecting฀a฀DisplayPort฀cable฀to฀a฀component฀with฀a฀signal฀conversion฀adapter,฀an฀image฀may฀not฀appear.
•฀ Select฀DisplayPort฀cables฀feature฀a฀locking฀function.฀When฀removing฀this฀cable,฀hold฀down฀the฀top฀button฀to฀release฀the฀lock.
•฀

To output DisplayPort audio, set [DisplayPort1] or [DisplayPort2] at AUDIO INPUT in the OSD or choose [DisplayPort1] or
[DisplayPort2] by the remote control AUDIO INPUT button.

•฀

To display individual images at each connected monitors with the DisplayPort out connector, please set DisplayPort1.2 and
MST at DisplayPort in the TERMINAL SETTINGS (See page 37).

•฀

If the monitor’s main power is turned on after a connected computer is turned on, sometimes images are not displayed.
In this case, please turn off the computer then turn it on again.