2-14 General Description
STANDARD FEATURES
High performance
High-reliability
Quad-Core/Dual-Core Intel® Xeon®
Processor
– N8100-1417F: 1.86GHz
– N8100-1418F: 3.33GHz
– N8100-1419F: 2.50GHz
– N8100-1445F: 3.00GHz
– N8100-1420F: 3.16GHz
High-speed memory access (DDR2-667)
High-speed
1000BASE-T/100BASE-
TX/10BASE-T interface (2 ports)
(1Gbps/100Mbps/10Mbps supported)
High-speed disk access
(SATA2 and SAS)
Dual channel memory configuration
Memory monitoring feature (error
correction/error detection)
Memory x4/x8 SDDC feature
Sparing/mirroring memory feature
BIOS password feature
Temperature
detection
Cooling fan monitoring feature
Internal voltage monitoring feature
CPU/memory degradation feature
RAID System (SATA2/SAS)
Bus parity error detection
Error
notification
Redundant
fans
Mechanical security lock
Expandability
■
Large memory of up to 48GB
(4GB DIMMs x12 slots)
■
USB interface (USB 2.0)
■
Five integrated I/O expansion PCI slots
– PCI Express (x8): 2 slots
– PCI Express (x4): 1 slot (x8 connector)
– PCI-X (64-bit/133 MHz): 1 slot
– PCI (32-bit/33 MHz): 1 slot
■
SATA2 x2 channels (not for hard disk
drive)
■
Ultra ATA 100 x1 channel
■
Up to two multi-processors
■
Can be used as rack-mount type. (N8143-
71F rack conversion kit is required.)
Many Available Features
Management Utilities
El Torito Bootable CD-ROM (no emulation
mode) format support
Remote power-on feature
AC-LINK
feature
RAID System (SATA)
Hot-swap hard disk drive supported
IPMI v2.0 compliant Baseboard
Management Controller (BMC)
NEC
ESMPRO
NEC
DianaScope
NEC EXPRESSSCOPE Engine 2
Power monitoring feature
RAID System Management Utility
Hard disk drive monitoring feature
Power Saving Feature
Easy and Fine Setup
Sleep
feature
(available for Windows Server 2003)
Enhanced Intel SpeedStep® Technology
Enhanced Halt State supported
NEC EXPRESSBUILDER (system setup
utility)
BIOS setup utility
Parameter File Creator
Summary of Contents for N8100-1417F
