1. Installing Internal Optional Devices
Express5800/R120d-2M User’s Guide
104
Chapter 2 Preparations
1.21
Installing Air Duct
Install air duct in reverse order of removal. Refer to
Chapter 2
(
1.9 Removing Air Duct
).
Important Before removing the air duct, put cables aside. Otherwise, cables may be damaged
if they are pulled together with air duct.
1.22
Installing Support Bar
Install support bar in reverse order of removal. Refer to
Chapter 2 (1.8 Removing Support Bar
).
1.23
Installing PCI Riser Card
Install PCI riser card in reverse order of removal. Refer to
Chapter 2 (1.7 Removing PCI Riser Card)
.
1.24
Installing Top Cover
When all internal optional devices are installed, close the server with Top Cover.
1. Put Top Cover straight on the server chassis so that it can be surely engaged with the chassis
frame.
2. Slide Top Cover toward the front of the server.
3. Tighten the thumb nut on rear of the server.
