1. Installing Internal Optional Devices
Express5800/R120d-2M User’s Guide
109
Chapter 2 Preparations
1.26.2
Installation
Follow steps below to install a power supply unit:
1. Refer to steps 1 to 4 in
Chapter 2 (1.3 Overview of Installation and Removal)
for preparations.
2. Remove the blank cover.
Important Keep the removed blank cover for future use.
3. Firmly insert the power supply unit until it is locked with clicking sound.
4. Connect power cords.
Use the power cord that comes with the server and the one comes with the additional power supply unit.
The AC POWER LEDs blink green when the power cords are connected.
If the power unit is not connected with the power cord, its AC POWER LED goes on amber.
When the power cords are connected, AC POWER LEDs on both power supply units blink green.
5. Power on the server.
The AC POWER LEDs go on green.
6. Confirm, by the STATUS LED or on the POST screen, that there are no errors related to the power
supply units.
Refer to
Chapter 2 (5. Troubleshooting)
of the
Maintenance Guide
for details on the error messages.
If the AC POWER LEDs are off, reinstall the power supply units. If the same error message still appears,
contact your service representative.
Power cord for
power supply unit
2
Power cord for
power supply unit
1
Power supply unit 1
(standard)
Power supply unit 2
(option)
AC POWER
LED
AC POWER LED
