2. System BIOS Setup
Express5800/R120d-2M User’s Guide
131
Chapter 3 Setup
Password
If you have set a password, a message prompt you to enter password will be displayed from the next time.
Enter password [ ]
You can attempt password entry up to 3 times.
If you entered a wrong password 3 times, operation stops.
(You cannot operate further.) Turn off the power.
Saving changes
If you finish configuration, select
Save & Exit
and then
Save Changes and Exit
to save changes and exit.
If you wish to exit without saving the changed parameters, select
Save & Exit
and then
Discard Changes
and Exit
.
Or if you wish to restore the setting to default values, select
Save & Exit
and then
Load Setup Defaults
.
(
The default value might be different from the factory setting.
)
