4. Names and Functions of Parts
Express5800/R120d-2M User’s Guide
30
Chapter 1 General Description
4.
Names and Functions of Parts
This section describes the names of the server parts.
4.1
Front View
(1)
Front Bezel
The cover to protect the front of the server. This cover can
be locked with the provided Bezel Lock Key.
(5)
STATUS LED
This LED indicates the server status. (See page 38.)
(2)
Key Slot
The slot for Bezel Lock Key that is used to lock Front
Bezel.
(6)
Unit ID (UID) LED
This LED turns on when UID Switch is pressed.
Commands from the software also cause it to turn on or
flash. (See page 39.)
(3)
LINK/ACT LED
This LED turns on when the server is connected to the
network.
(3)-1: LAN connector 1
(3)-2: LAN connector 2
(3)-3: LAN connector 3
(3)-4: LAN connector 4
LEDs for LAN3 and LAN4 are lit when optional LAN riser
card is installed. (See page 39.)
(7)
POWER LED
This LED indicates power status of server.(See page 37.)
(4)
Disk Access LED
This LED indicates status of internal hard disk drive.
(See page 39.)
(1)
(2)
(3)-1
(3)-2
(3)-3
(3)-4
(4)
(5)
(6)
(7)
