1. Installing Internal Optional Devices
Express5800/GT110e-S User’s Guide
82
Chapter 2 Preparations
2.5-inch Hard Disk Drive model/liquid cooling system
Model name
Product
name
PCI EXPRESS 2.0
Remarks
PCI#1
PCI#2
PCI slot performance
*1
X4lane
X4lane
Slot size
Low Profile
PCI card type
*1
X8
socket
x8
socket
Available card size
Up to167.6 mm (MD2)
N8103-128
RAID Controller (128 MB, RAID 0/1)
(Card performance: PCI EXPRESS 2.0 (x8))
−
Connects with internal drives
Can mount internal battery N8103-141 (450
mm cable)
N8103-149
RAID Controller (512MB, RAID 0/1)
(Card performance: PCI EXPRESS 2.0(x8))
−
Connects with internal drives
Can mount internal battery N8103-155.
N8103-150
RAID Controller (512MB, RAID 0/1/5/6)
(Card performance: PCI EXPRESS 2.0(x8))
−
N8103-151
RAID Controller (1GB, RAID 0/1/5/6)
(Card performance: PCI EXPRESS 2.0(x8))
−
N8104-138
1000BASE-T connection board (1ch)
(Card performance: PCI EXPRESS(x1))
For adding LAN
Teaming (AFT/SFT/ALB) and bonding with
N8104-132/133/138 and on-board LAN is
supported. Up to 2 teams per system. Up to
2 ports per team.
N8104-132
1000BASE-T connection board (2ch)
(Card performance: PCI EXPRESS(x1))
N8104-133
1000BASE-T connection board (4ch)
(Card performance: PCI EXPRESS(x2))
Can be installed
−
Cannot be installed
*1 Lane: Indicates the transfer performance (transfer bandwidth).
<e.g.> 1 lane = 2.5 Gbps (unidirectional), 4 lanes = 10 Gbps (unidirectional)
Socket: Indicates the connector size. A card up to the number of sockets can be connected.
<e.g.> x4socket = x1card, x4card can be installed. x8 card cannot be installed.
*2 The N8117-01A expansion RS-232C connector kit contains two types of cables. This server uses the RS-232C cable (B).
•
The depth of mountable boards is up to 167.6 mm (MD2).
•
For details of functions of each card, refer to the technical guide.
•
The card performance described in the parentheses after the Product name indicates the maximum operation performance
of the card.
•
Even if you use PCI cards of a higher performance than the PCI slot, the operation of the device will be that of the PCI slot.
About the standard network
You can use functional equivalents of AFT/SFT/ALB teaming and bonding with the standard network and the
following LAN cards:
N8104-132, N8104-133, N8104-138
