2. System BIOS Setup
Express5800/R110f-1E User’s Guide
132
Chapter 3 Setup
Category
Description
To be changed
Remark
When the server is supplied
with power from UPS, always
turn on the power.
Server
→
Power Control Configuration
→
AC-LINK
→
Power On
If it is turned off by using
POWER switch, leave it OFF
even when UPS supplies power.
Server
→
Power Control Configuration
→
AC-LINK
→
Last State
UPS
Powerlink
Keep the power OFF even
when UPS supplies power.
Server
→
Power Control Configuration
→
AC-LINK
→
Stay off
Password
If you have set a password, a message prompt you to enter password will be displayed from the next time.
Enter password [ ]
You can attempt password entry up to 3 times.
If you entered a wrong password 3 times, operation stops.
(You cannot operate further.) Turn off the power.
Saving changes
If you finish configuration, select
Save & Exit
and then
Save Changes and Exit
to save changes and exit.
If you wish to exit without saving the changed parameters, select
Save & Exit
and then
Discard Changes and
Exit
.
Or if you wish to restore the setting to default values, select
Save & Exit
and then
Load Setup Defaults
.
(
The default value might be different from the factory setting.
)
