3. EXPRESSSCOPE ENGINE 3
Express5800/R110f-1E User’s Guide
133
Chapter 3 Setup
3.
EXPRESSSCOPE ENGINE 3
3.1
Overview
EXPRESSSCOPE Engine 3 provides a variety of features using BMC (Baseboard Management Controller),
which is a system management LSI.
EXPRESSSCOPE Engine 3 monitors the power unit, fans, temperature, and voltage of the server. If you have
the management LAN connector connected to the network, you can remotely perform the following over a web
browser or SSH client:
•
Manage the server
•
Remotely control the keyboard, video, and mouse (KVM)*
•
Remotely access a CD/DVD/floppy disk/ISO image/USB memory*.
*
To use this feature, the optional license for remote management (N8115-04) is required.
To enable this feature, a USB mass storage device (Remote FD, Remote CD/DVD, Remote USB Memory, or
Virtual Flash) is virtually connected.
If the server runs on Windows Server 2008 R2, this feature does not support the video resolution of 1280 x
1024 (at 60 Hz, 32-bit).
Note
(If N8115-04 Remove KVM and Media License if installed)
More than one removable drives other than the actual drive are displayed on the
operating system of the host system. This is a normal operation and these added
removable drives are the virtual removable drives reserved for the remote media
function of EXPRESSSCOPE Engine 3 (*1).
Fig. 1 Exp. Windows Server 2008 R2 Computer Folder (*2)
Fig. 2 Exp. Windows Server 2008 R2 Server Manager (*2)
*1 A function to use FD/CD/DVD drives, ISO images and USB memories
connected to the management PC as drives virtually connected to the host
system.
*2 The number of drives and the drive character are different depending on
system configurations.
