Precautions for Use (Be Sure to Read)
Express5800/R110f-1E User’s Guide
18
CAUTION
Do not use any unauthorized interface cable.
Use only the interface cables provided with the server. Electric current that exceeds the amount allowed
could cause fire. Also, observe the following precautions to prevent electrical shock or fire caused by a
damaged power cord.
•
Do not stretch the cord harness
•
Do not bend the power cord.
•
Do not twist the power cord
•
Do not step on the power cord.
•
Uncoil the power cord before use
•
Do not secure the power cord with staples or
equivalents
•
Do not pinch the power cord
•
Keep chemicals away from the power cord
•
Do not place any object on the power cord
•
Do not alter, modify, or repair the power cord
•
Do not use a damaged power cord (replace the
damaged power cord with a power cord of the
same standard. For information on replacing the
power cord, contact the store where you
purchased the product or a sales representative)
Do not use the attached power cord for any other devices or usage.
The power cord that comes with your server is designed aiming to connect with this server and to use with
the server, and its safety has been tested. Do not use the attached power cord for any other purpose.
Doing so may cause a fire or an electric shock.
Do not pull out a cable by gripping the cable part.
Pull a cable straight out by gripping the connector part. Pulling a cable by gripping the cable part or
applying extra pressure to the connector part may damage the cable part, which may cause a fire or
electric shock.
