1. Installing Internal Optional Devices
Express5800/R110f-1E User’s Guide
53
Chapter 2 Preparations
Note
Chassis lock tab:
If the top cover is locked as shown in the figure below, remove the padlock.
7.
Depending on the components to be installed or removed, follow the procedure in order.
Refer to
Chapter 2
(
1.7 Internal Flash Memory
to
1.13 Optical Disk Drive).
8. Connect
cables.
Refer to
Chapter 2
(
1.10.1 Connecting cables)
.
9.
Attach the top cover.
Refer to
Chapter 2
(
1.19 Attaching the Top Cover)
.
10. Mount the server onto the rack.
Refer to
Chapter 2 (2.1.2 (1) Installation).
11. Install Hard Disk Drives.
Refer to
Chapter 2 (1.15 3.5-inch Hard Disk Drive
or
1.16 2.5-inch Hard Disk Drive)
.
12. Attach the front bezel.
Refer to
Chapter 2 (1.20 Attaching the Front Bezel).
This is the end of the installation or removal procedures for internal optional devices.
Continue the setup with reference to
Chapter 2 (2.2 Connection)
.
