84 Built-in AIT
3
Set the AIT data cartridge orienta-
tion as shown here and insert it into
the data cartridge slot.
By inserting the data cartridge to the
extent, it is automatically set in the
drive and the TAPE LED lights.
4
Close the dust cover.
Important
• When write-protect is enabled using the AIT data cartridge
write-protect plug so that you cannot write data in the data
cartridge, the STATUS LED lights.
• Mount the Dust-Proof Cover
In order to avoid disrepair, the Dust-
Proof Cover is designed to come
away easily. It is easy to attach the
cover by fitting it into the direction
which is indicated by arrows in Fig. 1
when the cover came off.
Write-protect plug (Sliding it to the right
write-protects the cartridge.)
(
→
91 page)
STATUS LED
Dust-proof cover
Fig. 1
