Specification 95
Specifications
The N8151-50F Built-In AIT has the following specification:
■
Performance
Memory capacity
35 Gbyte (In the compression mode: 70 Gbyte) when
using AIT1 Data Cartridge: tape length 230 m
25 Gbyte (In the compression mode: 50 Gbyte) when
using AIT1 Data Cartridge: tape length 170 m
The value in the compression mode is obtained when the
compression efficiency is X2.
The compression efficiency varies with the data pattern.
Bit error code
10
-17
or less
Data transfer rate
Internal transfer rate: 2.5 Mbytes/second
Note: The actual transfer rate depends on your system.
IDE transfer rate
Ultra DMA mode 4:
66.6 Mbytes/second
PIO transfer mode 4:
16.6 Mbytes/second
PIO transfer mode 0:
3.33 Mbytes/second
Note: The transfer mode entrusts to each host.
Initialize time
Less than 5 seconds
Load time
Less than 14 seconds
Unload time
Less than 20 seconds
Rewind time
Less than 105 seconds
■
Environmental requirement
During operation
Temperature: 10
°
C to 35
°
C
Humidity: 20% to 80% (no dew condensation allowed)
Highest dry bulb temperature: 26
°
C
During non-operation
Temperature: –40
°
C to 70
°
C
Humidity: 5% to 95% (no dew condensation allowed)
■
Power supply specification
Voltage
5 V±5%
12 V±10%
Current (Typ.)
1.4 A
0.45 A
Current (Max.)
2.5 A
1.2 A
