Built-in AIT 83
Handling
The following explains how to handle the N8151-50F Built-In AIT.
Setting the AIT data cartridge
Important
• As the data cartridge to be set in the magazine, use our “AIT Data Cartridge (model: AIT1)”. If
you use a data cartridge of other manufacturer, a read/write error may occur.
• While setting the data cartridge, do not turn off the basic processing unit. This may cause a
malfunction or damage data.
1
Turn on the basic processing unit.
Check that the drive’s STATUS LED,
BUSY LED and TAPE LED go off.
2
Press the EJECT button and open
the dust cover.
