N8406-023 1Gb Intelligent L3 Switch Command Reference Guide (ISCLI) 43
OSPF route codes information
The following command displays OSPF route information:
show ip ospf routes
Command mode:
All except User EXEC
Codes: IA - OSPF inter area,
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
IA 10.10.0.0/16 via 200.1.1.2
IA 40.1.1.0/28 via 20.1.1.2
IA 80.1.1.0/24 via 200.1.1.2
IA 100.1.1.0/24 via 20.1.1.2
IA 140.1.1.0/27 via 20.1.1.2
IA 150.1.1.0/28 via 200.1.1.2
E2 172.18.1.1/32 via 30.1.1.2
E2 172.18.1.2/32 via 30.1.1.2
E2 172.18.1.3/32 via 30.1.1.2
E2 172.18.1.4/32 via 30.1.1.2
E2 172.18.1.5/32 via 30.1.1.2
E2 172.18.1.6/32 via 30.1.1.2
E2 172.18.1.7/32 via 30.1.1.2
E2 172.18.1.8/32 via 30.1.1.2
Routing Information Protocol information
The following table describes the Routing Information Protocol (RIP) information commands.
Table 34 RIP information commands
Command
Usage
show ip rip routes
Displays RIP routes.
Command mode
:
All except User EXEC
show ip rip interface [
<1-255>
]
Displays RIP interface information.
Command mode
:
All except User EXEC
show interface ip [
<1-255>
] rip
Displays RIP user‘s configuration.
Command mode
:
All
RIP Routes information
The following command displays RIP route information:
show ip rip routes
Command mode:
All except User EXEC
3.0.0.0/8 via 30.1.1.11 metric 4
4.0.0.0/16 via 30.1.1.11 metric 16
10.0.0.0/8 via 30.1.1.2 metric 3
20.0.0.0/8 via 30.1.1.2 metric 2
This table contains all dynamic routes learned through RIP, including the routes that are undergoing garbage
collection with metric = 16. This table does not contain directly connected routes and locally configured static routes.
