CHAPTER 2 INSTALLATION
19-inch Rack Mounting Installation
NEAX2000 IVS
2
Installation Procedure Manual
Page 80
ND-70928 (E), Issue 1.0
• Connection of 19” RACK BRACKET (B)
(1) Place the BASE PLATE on the 19” RACK BRACKET (B).
(2) Secure the BASE PLATE with four washers and nuts.
(3) Mount the BASE to the BASE PLATE. (See
Figure 2-12
.)
(4) Mount the PIM to the BASE. (See
Figure 2-13
.)
NOTE:
Nuts and washers are attached to the 19” RACK BRACKET (B).
Figure 2-24 Connection of 19” RACK BRACKET (B)
NUT
WASHER
19” RACK BRACKET (B)
BASE PLATE