CHAPTER 2 INSTALLATION
Cable Running to External MDF
NEAX2000 IVS
2
Installation Procedure Manual
ND-70928 (E), Issue 1.0
Page 107
(3)
Connect the champ connector of each MDF cable to the LTC connector located on the PIM
using the screws provided, as shown below.
(4)
Secure the MDF cables to the PIM using tie wraps.
Figure 2-45 Cable Running to the External MDF (1 of 2)
(a) Using cable hole of BASE
BATTM
PIM2
PIM1
PIM0
FRONT
CHAMP CONNECTOR
LTC CONNECTOR
PIM3
TO MDF