CHAPTER 2 INSTALLATION
SN610/708/709/712 ATTCON (DLC)
NEAX2000 IVS
2
Installation Procedure Manual
Page 164
ND-70928 (E), Issue 1.0
STEP 2: Set the switch located inside the console according to the type of headset/handset con-
nected. Refer to next page.
Figure 2-75 Switch Setting on the SN610/708/709/712 ATTCON (1 of 2)
• Slide the directory out of the way.
Then insert a flat screw driver’s blade into the notched opening and apply light upward pres-
sure until the access panel is clear of the front lip. At the same time apply pressure (toward
you) at the rear of the pedestal to move the access panel.
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
ACCESS PANEL
DIRECTORY