CHAPTER 3 LAMP INDICATIONS AND SWITCH SETTINGS
PN-AP00-B (AP00)
NEAX2000 IVS
2
Installation Procedure Manual
Page 234
ND-70928 (E), Issue 1.0
ory buffer on the AP00 card even if the cable is disconnected from the DCE.
When the switch is set to OFF, the call records or system messages will be stored
when the cable is disconnected, and will be sent when the cable is re-connected.
NOTE 4: The use of the external clock (from the distant end) or the internal clock is determined
by the following table:
CLOCK
SW2
2
6
External
ON
OFF
Internal
OFF
ON