CHAPTER 1 GENERAL INFORMATION
Application Processor Card
NEAX2000 IVS
2
Installation Procedure Manual
ND-70928 (E), Issue 1.0
Page 17
PN-DAIA
DAI
Digital Trunk Interface (23B+D, 1.5 Mbps) Card for Remote
PIM
Accomodates 24-channel PCM digital lines, and provides
Firmware Processor and BUS interface.
One through three cards, corresponding to the number of
remote site, must be provided at main site.
PN-DAIB
DAI
Digital Trunk Interface (23B+D, 1.5 Mbps) Card for Remote
PIM
Accomodates 24-channel PCM digital lines, and provides
Firmware Processor.
One card is required per Remote PIM at remote site.
PN-DAIC
DAI
Digital Trunk Interface (23B+D, 1.5 Mbps) Channel
Expansion Card
Accomodates 24-channel PCM digital lines.
One through six cards can be provided at main site.
Two cards can be provided at remote site.
PN-DAID
DAI
Digital Trunk Interface (2 Mbps) Card for Remote PIM
Accomodates 30-channel PCM digital lines, and provides
Firmware Processor and BUS interface.
One through three cards, corresponding to the number of
remote site, must be provided at main site.
PN-DAIE
DAI
Digital Trunk Interface (2 Mbps) Card for Remote PIM
Accomodates 30-channel PCM digital lines, and provides
Firmware Processor.
One card is required per Remote PIM at remote site.
PN-DAIF
DAI
Digital Trunk Interface (2 Mbps) Channel Expansion Card
Accomodates 30-channel PCM digital lines.
One through three cards can be provided at main site.
One card can be provided at remote site.
PN-24DTA-C
DTI
Digital Trunk Interface (23B+D, 1.5 Mbps) Card
Accommodates 24-channel PCM digital lines.
PN-30DTC-A
DTI
Digital Trunk Interface (2 Mbps) Card
Accommodates 30-channel PCM digital lines.
Table 1-4 Application Processor Card Name and Function (Continued)
EQUIPMENT
NAME
FUNCTIONAL
NAME
FUNCTION