CHAPTER 1 GENERAL INFORMATION
Line/Trunk Card
NEAX2000 IVS
2
Installation Procedure Manual
Page 24
ND-70928 (E), Issue 1.0
PN-4LCL
[For China]
LC
4-line Analog Line Circuit Card for Single Line Telephones
Loop resistance : Max. 600 ohms (including telephone set)
Provides Message Waiting Lamp control function for each
circuit, and reverse function for only No. 3 circuit.
Equipped with +80V DC-DC on-board power supply.
PN-4LCV
[For Brazil]
LC
4-Line Analog Line Circuit Card for Single Line Telephones
Loop resistance : Max. 600 ohms (including telephone set)
PN-4LCW
[For Brazil]
LC
4-line Analog Line Circuit Card for Single Line Telephones
Loop resistance : Max. 600 ohms (including telephone set)
Provides Message Waiting Lamp control function for each
circuit, and reverse function for only No. 3 circuit.
Equipped with +80V DC-DC on-board power supply.
PN-8LCAA
LC
8-line Analog Line Circuit Card for Single Line Telephones
Loop resistance : Max. 600 ohms (including telephone set)
Provides Message Waiting Lamp control, momentary open
functions for each circuit.
PN-2LDTA
[For
Australia/Oth-
ers]
LDT
2-line Loop Dial Trunk Card
Line resistance: Max. 2500 ohms (including internal resis-
tance of the distant office equipment)
Equipped with –48V DC-DC on-board power supply.
PN-M03
M03
V.35 Data Terminal Equipment Interface Card
Used together with the PN-2DPCB card to provide the V.35
interface.
PN-M10
M10
Optical Interface Card
Provides internal optical modem to T1/E1 network or Remote
PIM.
Line length
: 10 km or less
Line coding : CMI
Table 1-5 Line/Trunk Card Name and Function (Continued)
EQUIPMENT
NAME
FUNCTIONAL
NAME
FUNCTION
