CHAPTER 2 INSTALLATION
Stationary Equipment (For North America/Australia)
NEAX2000 IVS
2
Installation Procedure Manual
ND-70928 (E), Issue 1.0
Page 47
Stationary Equipment (For North America/Australia)
The equipment is placed on the BASE TRAY which is fixed on the floor, and is connected to 120V/
240V AC Power Source using AC CORD-D cable.
For installation of Stationary Equipment, see the following pages.
WIRING AC CABLE TO TERMINALS
- Using AC CORD-D
Page 50
INSTALLATION OF MAIN EQUIPMENT - Floor Marking for BASE TRAY
Page 58
- Installation of PIM, For Stationary Equipment
Page 55
Fixed Equipment (For North America/Australia)
The equipment is fixed on the floor by BASE PLATE and anchor bolts, and is connected to AC
Power Distribution Board using installation cable.
For installation of this equipment, see the following pages.
WIRING AC CABLE TO TERMINALS
- Using installation Cable
Page 52
INSTALLATION OF MAIN EQUIPMENT - Floor Marking for BASE PLATE
Page 58
- Installation of PIM, For Fixed Equipment
Page 55
Fixed Equipment (For Other Countries)
The equipment is fixed on the floor by BASE PLATE and anchor bolts, and is connected to 120V/
240V AC Power Source using AC CORD-D cable.
For installation of this equipment, see the following pages.
WIRING AC CABLE TO TERMINALS
- Using AC CORD-D
Page 50
INSTALLATION OF MAIN EQUIPMENT - Floor Marking for BASE PLATE
Page 58
- Installation of PIM, For Fixed Equipment
Page 55